HIKSEMI GUARD PRO Surveillance SD Card Datasheet
The HIKSEMI GUARD PRO Surveillance SD Card series is engineered to deliver enterprise-grade endurance, stability, and high performance for professional 24/7 video recording environments. Tailored for continuous write cycles, these cards are optimized for IP cameras, dash cams, and home security systems across Pakistan.
Key Features
-
24/7 Continuous Recording: Tailored with specialized edge-storage algorithms to handle non-stop write and overwrite cycles without dropping frames.
-
Intelligent Storage Maintenance: Integrates an active S.M.A.R.T. health detection interface. When paired with compatible surveillance platforms, it monitors card health data in real time, alerting users before the card approaches its end-of-life expectancy.
-
All-Weather Resilience: Built with robust eTLC / specialized NAND flash to withstand Pakistan’s extreme summer temperatures and harsh deployment environments.
-
Pro-Grade Speed Class: Meets Class 10, U3, and V30 standards, ensuring stable 4K UHD and Full HD video streams.
Technical Specifications & Variants
The GUARD PRO series scales from 32GB to 1TB to accommodate differing archival and resolution needs.
| Product Model / Variant |
Capacity |
Max Read Speed |
Max Write Speed |
Speed Class |
NAND Flash |
| HS-SD-GUARDPRO-32G |
32GB |
Up to 100 MB/s |
Up to 20 MB/s |
Class 10, U1 |
eTLC / TLC |
| HS-SD-GUARDPRO-64G |
64GB |
Up to 100 MB/s |
Up to 50 MB/s |
Class 10, U3, V30 |
eTLC / TLC |
| HS-SD-GUARDPRO-128G |
128GB |
Up to 100 MB/s |
Up to 90 MB/s |
Class 10, U3, V30 |
eTLC / TLC |
| HS-SD-GUARDPRO-256G |
256GB |
Up to 100 MB/s |
Up to 90 MB/s |
Class 10, U3, V30 |
eTLC / TLC |
| HS-SD-GUARDPRO-512G |
512GB |
Up to 100 MB/s |
Up to 90 MB/s |
Class 10, U3, V30 |
eTLC / TLC |
| HS-SD-GUARDPRO-1TB |
1TB |
Up to 100 MB/s |
Up to 90 MB/s |
Class 10, U3, V30 |
eTLC / TLC |
Environmental & Physical Metrics
-
Form Factor: SDHC (32GB) / SDXC (64GB to 1TB)
-
Dimensions: 32 mm × 24 mm × 2.1 mm (1.26” × 0.94” × 0.08”)
-
Operating Temperature: -25°C to 85°C
-
Storage Temperature: -40°C to 85°C
-
Host Compatibility: Fully backward compatible with standard SDHC, SDXC, SDHC UHS-I, and SDXC UHS-I host slots.
Deployment, Installation, and Configuration
Physical Installation
-
Power Down Host Device: Ensure the IP camera, NVR, or surveillance terminal is completely powered off before handling storage media to prevent electrical shorting or data corruption.
-
Orientation Check: Align the gold contact pins of the HIKSEMI GUARD PRO card facing the designated direction dictated by the device’s slot diagram.
-
Insertion: Gently press the card into the slot until it clicks securely into place. Avoid using excessive force.
Software Configuration
-
Initial Initialization: Boot up the surveillance device or log into its network management panel (via web browser or VMS software).
-
Format Storage: Navigate to Storage Management or Device Settings. Select the newly installed HIKSEMI card and execute a full format using the native filesystem format of the camera (typically FAT32 for smaller cards or exFAT for high-capacity variants).
-
Recording Schedules: Configure the camera stream to either Continuous Recording (24/7) or Motion/Event Triggered Recording depending on the specific retention policy.
-
S.M.A.R.T Health Monitoring: For compatible surveillance ecosystems, toggle the health tracking service in the control panel to receive automated push alerts regarding the card’s wear level and operational lifespan.
Exclusive Availability Notice
SKYRS Pakistan Network Alert: > Please be advised that the genuine HIKSEMI GUARD PRO Surveillance SD Card series—spanning all storage variants from 32GB up to 1TB—along with certified localized technical backup, implementation support, and official deployment coverage, is available only at SKYRS within the territory of Pakistan. Authorized product distribution and premium project configuration warranties are handled strictly through the SKYRS central product desks.
