APC SRT10KXLT30 10kVA APC Smart-UPS On-Line, 10kVA/10kW, Tower, 208V, 6x L6-30R NEMA outlets, Network Card+SmartSlot, Extended runtime, W/O rail kit SRT10KXLT30

APC SRT10KXLT-IEC Data Sheet

The APC by Schneider Electric Smart-UPS On-Line SRT10KXLT-IEC is an enterprise-class, high-density double-conversion online Uninterruptible Power Supply (UPS) operating at a true unity power factor ($10text{kW} / 10text{kVA}$). Engineered specifically for high-capacity networking hardware, storage arrays, and multi-tenant cloud blade servers, this premium model replaces standard NEMA sockets with international IEC receptacles. It delivers continuous, clean, zero-transfer-time pure sine wave power conditioning under severe electrical grid fluctuations.

Technical Specifications

• Topology: True Double-Conversion Online

• Power Capacity: 10,000 VA / 10,000 W (Unity Power Factor)

• Form Factor: Standalone Tower configuration (Convertible to 6U Rackmount layout utilizing optional rail kit hardware)

• Nominal Input Voltage: 208V AC / 240V AC Single-Phase

• Nominal Output Voltage: 208V AC / 240V AC (Pure Sine Wave format)

• Input Connection: 1x Hard Wire 3-wire ($2text{PH} + text{G}$)

• Output Receptacle Array:

  • 6x IEC 60320 C13 outlets

  • 4x IEC 60320 C19 high-density outlets

  • 3x IEC Jumper lines

  • 1x Hardwire 3-wire ($2text{PH} + text{G}$) integrated terminal zone

• Internal Battery Architecture: $pm192text{V}$ DC split-bus setup; leak-proof, hot-swappable, maintenance-free Lead-Acid (VRLA) cells (Uses 2x APCRBC140 blocks)

• Scalable Autonomy: Supports daisy-chain pairing with up to 10 external runtime battery packs (SRT192BP2) featuring automatic system parameter detection

• Embedded Management: Pre-installed Network Management Card 3 (NMC3) with environmental monitoring capabilities, plus 1 open SmartSlot

• Surge Protection Rating: 480 Joules

• Physical Dimensions: 17.01 in (432 mm) Height x 10.35 in (263 mm) Width x 28.15 in (715 mm) Depth

• Net Weight: 245.99 lbs (111.58 kg)

SKYRS Pakistan Availability and Variant Coverage

The baseline SRT10KXLT-IEC is designed around a North American single-phase 208V/240V input grounding footprint. Because standard commercial building utility lines in Pakistan function on a single-phase 230V / three-phase 400V 50Hz infrastructure, safe physical operation requires precise localized systems engineering. SKYRS stands as the exclusive source, systems integrator, and support distributor for this complete model family and its corresponding variations in Pakistan.

Supported Platform Variants via SKYRS

• APC SRT10KXLT-IEC (Base Tower Layout): The core 208V/240V tower configuration utilizing international IEC outputs, imported and modified by SKYRS with isolation systems for specific high-density server rooms.

• APC SRT10KRMXLT-IEC (Rackmount Pack): The exact technical twin shipped factory-configured for 6U structural enclosure tracking, arriving with premium 4-post sliding rail kits (SRTRK2) optimized by SKYRS.

• APC SRT10KXLI (Native International Grid Version): The native 230V single-phase / 400V three-phase configuration equipped with IEC sockets, operating seamlessly on standard Pakistani building infrastructure without requiring external transformer correction.

• Extended Run Options (SRT192BP2 / SRT192RMBP2): High-capacity matching external battery cabinets integrated by SKYRS to defend critical data hubs against extended, rolling industrial power outages.

Exclusive Deployment, Installation, and Configuration via SKYRS

The entire deployment lifecycle, high-voltage balancing, localized phase transformation, and data center automation protocols for the SRT10KXLT-IEC series are available exclusively through certified technical field divisions from SKYRS inside Pakistan.

1. Structural Mechanical Deployment and Positioning

• Load Isolation Assessment: SKYRS engineering teams handle strict physical site assessments to verify that raised data room floors or equipment racks can support the 111.58 kg physical deadweight of the device.

• Convertible Frame Orientation: Technicians execute on-site physical conversion and programming of the internal multi-function graphical LCD matrix module depending on whether the system is standing as an upright Tower or sliding into 19-inch IT frames.

• Thermal Envelope Profiling: Configuring placement metrics to handle up to $2490text{ Btu/hr}$ of front-to-back thermal dissipation, aligning the unit perfectly with local hot/cold aisle isolation parameters.

2. High-Voltage Electrical Installation and Phase Adaptation

• Mains Wiring Integration: High-gauge copper conductor hardwire integration from local single-phase or multi-phase commercial distribution boards, utilizing tailored industrial circuit breakers to manage the initial system load safely.

• Grid Matching Engineering: For setups running the native 208V/240V input SRT10KXLT-IEC on standard Pakistani 230V lines, SKYRS electrical engineers build out complementary isolation step-down or step-up transformer enclosures to ensure an optimized, continuous ground-neutral bond.

3. Programmatic Configuration and Network Cybersecurity Commissioning

• LCD Matrix Customization: Initializing system parameters via the multi-function, multi-color backlit graphic interface. Engineers program precise output voltage settings, automated bypass windows (50 Hz native standard), and cold-start priorities.

• Network Management Integration: Assigning dedicated static IP configurations to the embedded Network Management Card 3 (NMC3). SKYRS network engineers configure secure SNMPv3, SSH, and HTTPS protocols to link the platform directly with PowerChute Network Shutdown and centralized EcoStruxure IT platforms. This enables automated graceful shutdown macros for physical servers, virtual machines (VMs), and hyperconverged infrastructure (HCI) clusters across local Pakistani corporate networks during catastrophic, prolonged grid failures.