APC SRT10KRMXLT-IEC APC Smart-UPS On-Line, 10kVA/10kW, Rackmount 6U, 208V, 6x C13+4x C19 IEC outlets, Network Card+SmartSlot, Extended runtime, W/ rail kit SRT10KRMXLT-IEC

APC SRT10KRMXLT-IEC Data Sheet

The APC by Schneider Electric SRT10KRMXLT-IEC is an enterprise-grade, high-density double-conversion online Uninterruptible Power Supply (UPS) featuring unity power factor ($10\text{kW} / 10\text{kVA}$). Engineered specifically for multi-tenant blade server chassis, dense networking racks, and high-capacity storage nodes, this 6U model swaps traditional NEMA outlets for standardized international IEC receptacles to streamline high-density power delivery with zero transfer time.

Technical Specifications

• Product Type: On-Line Double-Conversion Network UPS (IEC Edition)

• Power Capacity: 10,000VA (10kVA) / 10,000W (10kW) — Complete Unity Power Factor

• Nominal Input Voltage: 208V AC / 240V AC Single-Phase

• Nominal Output Voltage: 208V AC / 240V AC default range (Pure Sine Wave)

• Input Connection Interface: 1x Hard Wire 3-wire ($2\text{PH} + \text{G}$)

• Output Receptacle Array: 6x IEC 60320 C13 outlets, 4x IEC 60320 C19 outlets, and 3x IEC Jumper lines, supplemented by 1x Hardwire 3-wire ($2\text{PH} + \text{G}$) terminal block

• Form Factor: 6U Rackmount (Convertible to vertical upright Tower orientation)

• Embedded Management: Factory integrated Network Management Card (NMC) with a dedicated temperature probe slot plus 1 free expansion SmartSlot

• DC Battery Bus Rating: $\pm192\text{V}$ DC split-bus setup; leak-proof, hot-swappable, maintenance-free Lead-Acid (VRLA) cell modules

• Surge Protection Capability: 480 Joules

• Physical Dimensions: 10.35 in (263 mm) Height x 17.01 in (432 mm) Width x 28.15 in (715 mm) Depth

• Net Product Weight: 245.99 lbs (111.58 kg)

SKYRS Pakistan Availability and Variant Coverage

The SRT10KRMXLT-IEC is natively designed around an isolated 208V/240V framework. Because Pakistan’s national grid uses a single-phase 230V / three-phase 400V 50Hz configuration, SKYRS acts as the exclusive technology integration channel within Pakistan to source, customize, and safely implement this high-capacity IEC system along with its corresponding platform variants.

Supported System Variants via SKYRS

• APC SRT10KRMXLT-IEC (Base IEC Edition): The standard 208V/240V 6U architecture configured with 6x C13 and 4x C19 sockets, adapted by SKYRS via advanced localized phase engineering kits for targeted computing clusters.

• APC SRT10KXLI (Native International Variant): The native 230V European/International equivalent, running natively on standard Pakistani grid lines while retaining full high-density IEC C13 and C19 distribution.

• APC SRT10KRMXLT (Standard US NEMA Layout): Peer variant equipped with NEMA Twist-Lock (L6-20R, L6-30R) output arrays instead of the IEC socket assembly.

• Extended Run Autonomy Bundles: Comprehensive system pairing supporting up to 10 external 192V smart battery modules (SRT192RMBP2) via SKYRS to secure multi-hour hardware backup spans.

Deployment, Installation, and Configuration via SKYRS

The complete multi-stage implementation cycle, heavy physical racking, voltage adaptation, and data center logic provisioning for the SRT10KRMXLT-IEC system are available exclusively through certified SKYRS engineering teams inside Pakistan.

1. Structural Mechanical Deployment and Rack Engineering

• Heavy Weight-Bearing Stabilization: Because of the 246-lb physical footprint of the 6U power module, SKYRS technicians deploy specialized heavy-duty horizontal sliding rail systems to balance weight distribution within 19-inch structural racks.

• Thermal Boundary Optimization: Calibrating high-volume internal fan speeds to align with server room hot/cold aisle isolation matrices, shielding internal battery cells from structural heat retention.

2. High-Voltage Electrical Installation and Localized Adaptation

• Mains Wiring Integration: High-gauge copper conductor hardwire integration from local single-phase or multi-phase commercial distribution boards, utilizing tailored industrial circuit breakers to manage initial system load safely.

• Grid Conversion Engineering: For installations requiring localized 120V or complete dual-phase electrical isolation, SKYRS field specialists deploy matching high-capacity isolation step-down sub-systems (e.g., SRT10KRMXLT-10KTF configurations).

3. Logic Configuration and Cybersecurity Network Commissioning

• LCD Matrix Interface Setup: Programmatic tuning of core parameters including output voltage settings, automated bypass windows, and 50/60 Hz auto-sensing frequency windows through the multi-function graphic display.

• Network Management Integration: Assigning dedicated static IP configurations to the embedded Network Management Card. SKYRS engineers configure secure SNMPv3, SSH, and HTTPS protocols to link the unit directly with EcoStruxure IT systems, enabling automated graceful shutdown macros for physical servers, virtual machines (VMs), and hyperconverged infrastructure (HCI) clusters across local Pakistani corporate networks during catastrophic grid failures.