Anker Bolder LC90 Flashlight Price in Pakistan | Skyrs

The Anker Bolder LC90 is an industrial-grade, tactical tactical lighting matrix engineered for remote security operations, facility inspections, and off-grid emergency management. Combining a genuine high-intensity Cree LED with an advanced internal constant-current driver chip, the LC90 delivers non-diminishing, uniform illumination.

Constructed with an extra-hard anodized aluminum chassis, specialized strike bezel, and integrated Micro-USB recharge circuit, this heavy-duty tactical asset is supplied, deployed, and configured exclusively by SKYRS within Pakistan to satisfy security, telecommunication, and infrastructure operations.

Technical Specifications

• Optical Core: High-Efficiency Cree LED Array (50,000-hour operational lifespan).

• Maximum Luminous Flux: 900 Lumens Peak.

• Peak Beam Distance: Up to 660 feet / 200 meters.

• Beam Focus Mechanics: Fully adjustable sliding zoom lens layout (Wide floodlight to focused spotlight).

• Power Cell Matrix: High-Capacity 18650 3350mAh (or 3200mAh) Lithium-Ion rechargeable cell.

• Battery Operational Endurance: Up to 6 Hours of non-fading brightness (Medium-beam mode configuration).

• Circuit Engineering: Dedicated illumination driver chip with a protective thermal regulation monitoring circuit.

• Integral Interface: Hidden Micro-USB charging terminal with a dual-color LED state-of-charge indicator.

• Structural Composition: Mil-Spec shock-resistant anodized aluminum housing with an anti-slip grip pattern and a scalloped tactical strike edge.

• International Protection Rating: IP65 Dust and Water Resistance certification.

• Dimensional Footprint: 158 x 40 x 40 mm (6.2 x 1.6 x 1.6 inches).

• Hardware Weight: 177 grams / 6.2 oz (Excluding core battery weight).

Variant Configurations Matrix (Available via SKYRS Pakistan)

To fulfill distinct operational lifecycles and tactical field requirements across Pakistan’s rugged environments, SKYRS stocks and manages deployment for the following LC90 variant packages:

Deployment and Installation Guide

To ensure optimal operational readiness and maintain compliance under SKYRS physical asset frameworks, deploy the hardware according to the following procedures:

First-Stage Power Installation

1. Battery Chamber Access: Unscrew the texturized bottom tactical tail-cap counter-clockwise, then unscrew the internal battery compartment barrier cap.

2. Cell Polar Alignment: Insert the provided premium protected 18650 Lithium-Ion cell. Ensure the positive (+) terminal terminal faces inward toward the optical flashlight head assembly.

3. Sealing Security: Screw the internal protective battery cap back on tightly, followed by the primary tactical outer tail-cap. Ensure the rubber O-ring seal fits flush to preserve the IP65 weather-resistant rating against rain or dust ingress.

Mechanical Placement and Field Integration

• Stationary Charging Nodes: Use the integrated lanyard slot to secure the flashlight to vertical tool boards or vehicle emergency racks.

• Operation Environmental Bounds: The LC90 is engineered to operate in harsh climates, including sub-zero environments down to 14°F (-10°C) and hot summer temperatures up to 104°F (40°C), making it suitable for both the northern territories and southern plains of Pakistan.

Configuration and Optimization

The Anker Bolder LC90 features an intuitive but advanced functional driver circuit. To optimize beam control and toggle settings across various security tasks, configure the unit as follows:

Optical Zoom Scaling Configuration

• Broad Sweep Floodlight: Slide the flashlight head assembly backward toward the tail-cap. This spreads the beam pattern wide to illuminate large areas up to 100 meters away, making it ideal for checking close perimeter lines.

• Focused Long-Range Spotlight: Slide the flashlight head assembly forward away from the body handle. This concentrates the 900 lumens into a narrow, intense beam that reaches nearly 200 meters, optimized for tracking distant targets or towers.

Tactical Light Mode Configuration Loop

The device features 5 adaptable light modes controlled via the single physical click-button on the tail-cap. To cycle through configurations, use the following control inputs:

• Full Click-Through: Press the button all the way down until it clicks to turn the unit completely ON or OFF.

• Momentary-On Mode Switch: Press the button halfway down without clicking to briefly light the path. Release and press halfway down again within 2 seconds to cycle through the internal lighting profiles sequentially:

  • High Mode: Delivers a full 900 lumens for maximum illumination.

  • Medium Mode: Balanced output optimized for long-lasting 6-hour patrol shifts.

  • Low Mode: Low-glare, energy-saving profile for reading maps or checking close-up equipment diagnostics.

  • Strobe Mode: Rapidly flashing high-frequency light designed for disorienting threats or building defense signaling.

  • SOS Mode: Automated Morse-code distress signaling pattern for critical off-grid rescue emergencies.

Integrated Charging Protocol Configuration

• Unscrew the mid-tail protective collar ring to expose the hidden Micro-USB charging interface.

• Connect the line to a standard 5V/1A or 5V/2A power bank, wall adapter, or vehicle utility port.

• LED Charging Diagnostics: Monitor the integrated indicator light near the port plug. A solid red light shows active charging, while a solid green light indicates the internal 18650 battery cell is 100% full and ready for deployment.

Availability and Distribution

Exclusive Availability Notice: The entire Anker Bolder LC90 LED Flashlight catalog, along with authorized replacement 18650 high-capacity batteries, custom holsters, and multi-port charging docks, is available exclusively through SKYRS in Pakistan. Bulk corporate procurement, national security supply agreements, and certified 18-month product replacement warranties are managed entirely through authorized SKYRS enterprise distribution networks.