TOA EAIV3 TOAlert / EverAlert Network Infrastructure Integrator
Official Hardware Integration Data Sheet & Core Systems Bridging Guide
The TOA EAIV3 (EverAlert Integrator) is an enterprise-grade, solid-state embedded network hardware appliance engineered to act as a mission-critical bridge between physical building safety systems and the digital TOAlert / EverAlert visual notification ecosystem. Fully compatible with the TOA N-8000 IP Intercom and VM-3000 Voice Alarm mass communication platforms, the EAIV3 converts local hardware dry-contact closure triggers into site-wide, synchronized visual overrides and instant multi-screen announcements across complex facilities throughout Pakistan.
| Parameter | Specification Details |
| Primary Core Function | Embedded network gateway bridging dry contacts to the cloud platform |
| Wired LAN Interface | 10/100 Mbps Fast Ethernet, RJ-45 Controller Port |
| Monitored Hardware Inputs | 2x Independent, General-Purpose Normally-Open (NO) Dry Contacts |
| Input Contact Loop Wiring | 25 feet (approx. 7.6 meters) maximum operational cable length |
| Hardware Output Control | 1x Relay output loop (Form C: Common, NO, NC connections supported) |
| Output Circuit Tolerance | Handles secondary low-power strobe lamps, standalone chime sounders, or master line-relays |
| System Capacity Scaling | Maximum of 5 active EAIV3 hardware appliances per singular physical site |
| Platform Language Base | Comprehensive dual formatting support (English and French native stringing) |
| Cloud Synchronization | Fully integrated with secure, encrypted web management environments |
| Input Utility Power | External switching power adapter (100 – 240 V AC, 50/60 Hz universal input) |
| Device Power Input | 12 V DC operating voltage |
| Dimensions (Device Body) | 142.2 (L) × 91.4 (W) × 25.4 (H) mm (5.6” L × 3.6” W × 1.0” H) |
| Gross Equipment Weight | Approx. 1.04 kg (2.3 lbs) including factory power accessories |
| Enclosure Construction | High-impact protective matte black composite shell housing |
The EAIV3 is assembled globally as a uniform high-reliability processing node. In the Pakistani market, SKYRS delivers this critical hardware infrastructure in optimized deployment configurations targeted for specific facilities:
EAIV3-FA (Fire Automation Integration Bundle): Pre-packaged with industrial-grade shielded transient-absorption modules, configured specifically to monitor master fire alarm control panel zones.
EAIV3-SEC (Lockdown & Panic Matrix Profile): Configured for integration with security control desk buttons, panic triggers, or ballistic lock mechanisms to initiate instant site-wide lockdown alerts on digital screens.
EAIV3-SYS (Multi-Tier Central Processing Bundle): A complete master platform assembly featuring up to 5 linked EAIV3 units, expanding monitoring capacity to up to 10 distinct emergency input lines.
Ensure the physical mounting spot sits within a maximum wire run of 25 feet (7.6 meters) from the target alarm output relay or panic switch terminal block.
Verify a dedicated, unfiltered Cat5e or Cat6 network dropped line is patched directly back to a stable enterprise local area network switch.
Confirm that local alarm control outputs utilize clean, unpowered normally-open (dry contact) switches before running connections to avoid hardware circuit damage.
Device Fastening: Secure the lightweight EAIV3 composite enclosure to the inner surface of an auxiliary security panel rack or flat against a equipment room wall using the integrated structural mounting tabs.
Input Loop Wiring: Route a premium twisted-pair conductor from the target alarm panel’s dry contacts to the EAIV3 input block. Secure the leads firmly into Input 1 or Input 2 positions. Do not exceed the 25-foot structural wiring threshold.
Auxiliary Output Integration (Optional): If local warning strobes or external sirens are required at the hub site, link their low-voltage power lines through the EAIV3 Form C relay output terminals (utilizing the Common and Normally-Open contact pairs).
Network and Power Up: Insert the network patch cable into the 10/100M RJ-45 LAN port. Plug the 12V DC power jack into the integrator, secure the cord path to prevent accidental disconnects, and insert the utility adapter into the 220V AC wall outlet.
Once wired, the EAIV3 acts as an autonomous gateway, securely pushing physical triggers up to the online platform dashboard for system-wide routing.
Discovery Mode: Power on the network segment and launch the web-based cloud administration console.
MAC Address Binding: Locate the new device listed on the dashboard (identifiable by matching the last four digits of the physical hardware MAC address printed on the back label). Rename the module to match its building location (e.g., “Main Fire Panel Integrator”).
Security Lock Down: Update any localized web configurations to restrict physical device probing, enforcing exclusive HTTPS handshake keys.
Defining the Triggers: Under the System Alarm Definitions submenu, create your targeted emergency scripts (such as “Emergency Evacuation” or “Intruder Alert”). Input custom text instructions, allocate background panel warning colors (such as flashing crimson red), and pick the corresponding audio warning chime.
Input Line Allocation: Open the EAIV3 profile and map Input 1 and Input 2 directly to your newly created custom templates via the drop-down menu selectors.
Output Relay Scripting: Configure the Form C output switch parameters. Program the integrated relay to close automatically when Input 1 drops, when a severe local weather alert is flagged, or across all global emergency alert triggers to activate visual strobe lights instantly.
Notice: The TOA EAIV3 TOAlert / EverAlert Infrastructure Integrator and its specialized automation software bundles are available, integrated, and supported exclusively by SKYRS within Pakistan.
SKYRS handles all corporate system license provisioning, localized official hardware warranties, and certified remote or on-site field engineering deployment assistance across all national markets.
