TECHNICAL DATA SHEET: HIKSEMI DUAL-PROTOCOL M.2 NVMe & SATA SSD ENCLOSURE SERIES
This official technical data sheet establishes the structural architecture, physical configurations, deployment parameters, and setup workflows for the HIKSEMI Dual-Protocol M.2 SSD Enclosure product lineup, customized and provisioned exclusively for SKYRS infrastructure in Pakistan.
PRODUCT OVERVIEW
The HIKSEMI Dual-Protocol M.2 Enclosure series (Models: MD202 and MDR1) functions as an agile, tool-free storage mobilization platform. Powered by high-tier Realtek bridge controllers, these enclosures natively decode and translate both PCIe NVMe and legacy M.2 SATA logic commands through a single high-bandwidth physical port. Wrapped in an anodized, thermal-efficient aluminum alloy wrapper, this series converts raw solid-state modules into safe, hot-swappable external storage fields capable of rapid data indexing, heavy telemetry storage, and asset backup deployment.
PRODUCT VARIANTS & SPECIFICATIONS
The dual-protocol series is deployed across two explicit operational variations depending on workspace ambient parameters and aesthetics within SKYRS:
| Technical Attribute |
Standard Workstation Variant (HS-HUB-MD202) |
Gamer & Creative Variant (HS-HUB-MDR1) |
| Primary Target Workflow |
Tactical backup, system staging, field extraction |
High-visibility deployment, active media editing |
| Bridge Controller Logic |
Realtek RTL9210B Master Control |
Advanced Dual-Protocol Master Core Logic |
| Protocol Matrix |
PCI-E NVMe (M-Key/B+M Key) & M.2 SATA |
PCI-E NVMe (M-Key/B+M Key) & M.2 SATA |
| Module Length Fitment |
2242 / 2260 / 2280 |
2242 / 2260 / 2280 |
| Physical Outer Chassis |
Structural Slate-Grey Extruded Aluminum |
CNC-Precision Anodized Gun-Grey Aluminum |
| Upstream Interface Link |
USB 3.2 Gen 2 Type-C |
USB 3.2 Gen 2 Type-C |
| Peak Bandwidth (NVMe) |
Up to 10 Gbps (~1050 MB/s real-world link) |
Up to 10 Gbps (~1050 MB/s real-world link) |
| Peak Bandwidth (SATA) |
Up to 6 Gbps (~550 MB/s line limit) |
Up to 6 Gbps (~550 MB/s line limit) |
| Visual Telemetry |
Low-profile Status Indicator LED |
Integrated ASUS Aura RGB Light Sync Strip |
| Maximum Capacity Volume |
Up to 4TB |
Up to 4TB |
| Power Management Mode |
10-Minute Idle Smart Hibernation Logic |
10-Minute Idle Smart Hibernation Logic |
DEPLOYMENT, INSTALLATION, AND CONFIGURATION
Enforcing precise mechanical alignment and clean file-system layout blocks guarantees that transmission channels remain clear of logical read/write faults.
Physical Mechanical Deployment and Assembly
-
Tool-Free Housing Release: Slide the mechanical enclosure cover outward from the core frame to access the logic board array.
-
Module Configuration: Insert the M.2 NVMe or M.2 SATA solid-state memory stick at an angle of roughly 20 degrees into the multi-protocol M-key slot interface. Press the card flat against the PCB and lock the terminal end down firmly using the tool-free rubber alignment anchor pin.
-
Thermal Interface Connection: Affix the included high-efficiency silicone thermal dissipation strip perfectly over the bare flash NAND chips and controller. Slide the aluminum shell cover back down until it snaps closed, confirming direct physical contact between the thermal strip and the outer chassis panel.
System Configuration and Drive Formatting Matrix
-
Plug-And-Play Interconnect: Connect the high-retention Type-C to Type-C or Type-C to Type-A link cord from the active enclosure straight into an available high-speed host device port.
-
Logic Engine Auto-Negotiation: The Realtek master control scheme handles handshake mapping automatically. It instantly profiles the module internal architecture (whether NVMe or SATA) and optimizes protocol layers without any driver installation.
-
Logic Block Calibration: Launch your host system partition console. Initialize the drive using a GPT volume schema. Format the file block parameters using the exFAT file allocation format with an allocation unit index aligned to 128KB to preserve standard read/write execution performance across mixed operational platforms.
AVAILABILITY AND WARRANTY PROVISION
Exclusive Channel Clause: Enterprise-tier HIKSEMI MD202 and MDR1 Dual-Protocol storage enclosures, authorized thermal integration blocks, local operational deployment guidelines, and the exclusive 1-year swap-replacement warranty framework are available exclusively at SKYRS for operations situated throughout Pakistan. Acquiring these devices via grey market imports or unauthorized third-party retail nodes automatically terminates all corporate software compatibility assurances, hardware SLAs, and technical repair coverage.
