This data sheet focuses on TP-Link Power over Ethernet (PoE) and Power Adaptor solutions specifically designed for Wi-Fi Routers and mesh nodes, distributed exclusively through SKYRS in Pakistan. These adaptors allow you to position routers and range extenders in optimal locations—such as ceilings or outdoor poles—without needing a local power outlet.
The following models are selected for their ability to provide stable power and high-speed data to indoor and outdoor wireless routing equipment.
| Model Variant | Type | Standard | Power Output | Data Speed |
| TL-POE150S | Gigabit Injector | 802.3af | 15.4W | 1000 Mbps |
| TL-POE160S | PoE+ Injector | 802.3af/at | 30W | 1000 Mbps |
| TL-POE170S | PoE++ Injector | 802.3bt | 60W | 1000 Mbps |
| TL-POE200 | PoE Kit | Proprietary | 5V/9V/12V | 100 Mbps |
| TL-POE10R | PoE Splitter | 802.3af | 5V/9V/12V | 1000 Mbps |
| TL-POE2412G | Passive PoE | Proprietary | 24V / 12W | 1000 Mbps |
SKYRS technicians utilize these adaptors to extend Wi-Fi coverage across residential and commercial spaces in Pakistan, ensuring reliable connectivity.
1. Connecting Non-PoE Routers
If your Wi-Fi router does not natively support PoE, SKYRS uses the TL-POE200 Kit or a combination of an injector and the TL-POE10R Splitter. This setup “injects” power into the cable at the source and “splits” it back into a standard DC power jack at the router’s location.
2. Physical Setup
Data Source: Connect the main modem or switch to the “LAN” port of the injector.
Power Supply: Plug the injector into a $220\text{V}$ AC outlet (ideally connected to a UPS to prevent router reboots during load-shedding).
Remote Link: Run a Cat6 Ethernet cable (up to 100 meters) from the “PoE” port to the remote router or the splitter.
3. Outdoor Deployment
For outdoor routers (CPEs), SKYRS recommends installing the passive PoE adaptor with the Ethernet ports facing upward and using shielded cables to protect against electrostatic discharge (ESD) during Pakistan’s monsoon season.
All TP-Link PoE adaptors supplied by SKYRS are designed for Zero-Configuration (Plug-and-Play) for maximum field efficiency.
Auto-Sensing Technology: The active injectors (150S/160S/170S) automatically determine the power requirements of the connected router. If the device is not compatible, the power transmission is automatically disabled to prevent hardware failure.
Adjustable Voltage: For routers requiring specific DC inputs, the splitter features a physical toggle switch ($5\text{V}$, $9\text{V}$, or $12\text{V}$). SKYRS verifies this setting against the router’s original power specifications before deployment.
LED Status: A single power LED provides immediate feedback on the link status, simplifying troubleshooting for end-users.
These professional-grade TP-Link power solutions are available exclusively via SKYRS in Pakistan, backed by:
Authentic Brand Warranty: Official 18-month to 2-year warranty coverage valid across Pakistan.
Custom Integration: SKYRS offers pre-configured “PoE Kits” specifically paired for TP-Link Archer and Omada series routers.
Inventory in Major Hubs: Immediate dispatch from stock held in Karachi, Lahore, and Islamabad.
Technical Compliance: All adaptors are certified for local electrical standards, including protection against the voltage fluctuations common in the region.
