UNITEK USB 3.0 to SATA Adapters Price in Pakistan | Skyrs

UNITEK High-Speed Mass Storage Interconnect Series

Official Data Sheet | Authorized Distribution via SKYRS Pakistan

This technical data sheet outlines the high-performance UNITEK USB 3.0 to SATA converter and docking ecosystem variants. These tools are engineered for rapid data recovery, hot-swappable enterprise backups, drive cloning, and cold-storage management across Pakistan.

Product Variants

Variant 1: UNITEK SmartLink Manta USB 3.0 to 2.5 Inch SATA III Adapter

• SKU: Y-1096

• Primary Application: On-the-go field data retrieval, mobile technical benches, and high-speed laptop SSD migration.

• Key Features:

  • Bus-Powered Simplicity: Operates entirely on the host USB-A port power, designed for ultra-low profile 2.5″ SATA HDDs and SSDs.

  • UASP Acceleration: Features embedded UASP (USB Attached SCSI Protocol) logic that increases read and write indexing speeds by up to 20% over standard protocols.

  • Auto-Sleep Optimization: Enters an automated standby mode after 30 minutes of physical drive inactivity to extend drive lifespan.

Variant 2: UNITEK High-Speed USB 3.0 to SATA III Adapter with Desktop Power Link

• SKU: Y-1039

• Primary Application: Multi-form-factor data recovery, IT repair labs, and processing heavy 3.5″ desktop drives.

• Key Features:

  • Dual Form-Factor Engineering: Handles both 2.5-inch and 3.5-inch SATA I/II/III drives with data storage support reaching up to 18TB.

  • Dedicated Power Stabilization: Shipped with an external 12V/2A power subsystem to spin up high-draw mechanical platters smoothly.

  • Status Visual Indicator: Outfitted with a bright blue layout LED displaying active read/write drive telemetry.

Variant 3: UNITEK SmartLink Trinity USB 3.0 to IDE and SATA Universal Adapter Kit

• SKU: Y-3322 / Y-1031 Series

• Primary Application: Legacy system decommissioning, historic data archiving, and multi-generation device digital forensics.

• Key Features:

  • Triple-Drive Simultaneous Routing: Combines a modern SATA connector with a dual-head IDE matrix (40-pin and 44-pin physical ports) to run three hardware units concurrently.

  • Hardware One-Touch Backup (OTB): Features an integrated structural physical button to quickly launch automated system backup paths.

  • Comprehensive Legacy Kit: Includes a supplemental 4-pin internal Molex hardware power jumper alongside a primary 12V/2A utility block.

Variant 4: UNITEK USB 3.0 to SATA Dual-Bay Storage Docking Station

• SKU: Y-1078

• Primary Application: Massive server backup arrays, continuous automated backup drops, and tool-free multi-disk swapping.

• Key Features:

  • Vertical Slot Geometry: Features an open-air top insertion array that accepts bare drives cleanly, lowering running temperatures.

  • Direct Power Isolation: Outfitted with a physical rocker switch allowing users to safely cut power before pulling media, preventing data corruption.

  • Heavy-Duty Controller: Maintains stable data throughput pipelines reaching up to 5Gbps.

Technical Specifications Matrix

Deployment and Installation

Physical Storage Interconnect Procedures

1. Place the naked storage disk (SATA HDD or SSD) down on an anti-static work pad.

2. For Variant 1 and Variant 2 adapters, align the 15+7 pin layout of the adapter precisely with the drive’s rear contact lines and slide the adapter straight onto the drive. For Variant 4 docks, gently insert the bare drive vertically into the top slot until it locks into internal guides.

3. If deploying a heavy 3.5-inch desktop drive (Variants 2, 3, or 4), plug the native 12V/2A external power supply into the DC input barrel jack of the UNITEK adapter before patching the host computer.

4. Plug the USB 3.0 interface cable directly into a dedicated high-speed USB 3.0 (blue) or USB 3.1 port on the machine. Avoid unpowered external front-chassis expansion splits to maintain signal integrity.

Legacy IDE Unit Handling Constraints (Variant 3)

1. Set the mechanical jumper pin on the rear of your 3.5-inch IDE legacy drive to the “Master” profile configuration.

2. Align the IDE interface pin rows cleanly to prevent bending the pins, then firmly seat the terminal block.

3. Bridge the included 4-pin power jumper wire from the side socket of the UNITEK converter box straight to the power input array of the IDE drive chassis.

System Configuration

Plug-and-Play OS Handshakes

• Native Storage Class Drivers: The UNITEK SATA connection family runs on native Mass Storage Class (MSC) driver layers present in all modern operating systems. No external software files are required for basic storage visibility.

Drive Volume Initialization Setup

1. Turn on the hardware power switch (found on Variants 2, 3, and 4). The internal drive will begin spinning up, and the LED layout will stay lit.

2. Open the host system disk management tool (e.g., Disk Management in Windows or Disk Utility in macOS).

3. If using a brand-new, unformatted out-of-the-box drive, a prompt will ask to initialize the device. Select “GPT (GUID Partition Table)” for modern multi-terabyte systems.

4. Right-click the unallocated space partition, select “New Simple Volume,” and format the sector to your preferred layout (e.g., NTFS for Windows environments or APFS/exFAT for cross-platform deployments).

5. Always use the system’s “Safely Remove Hardware” or “Eject” command before flipping off the device power to safeguard raw write logs.

Exclusive Supply and Logistics Availability

National Sourcing Directive: High-volume commercial procurement, certified multi-branch hardware staging, and authorized 12-month localized swap warranties for the entire UNITEK USB 3.0 to SATA product ecosystem are managed exclusively by SKYRS inside Pakistan.

SKYRS Operational Distribution Network

• Commercial Footprint: Immediate inventory allocations, wholesale business contracts, and advanced technical data-recovery staging solutions are available directly through core SKYRS hubs serving Karachi, Lahore, Islamabad, Rawalpindi, Faisalabad, Peshawar, and Quetta.

• Warranty Validation: Certified regional protection and official manufacturer component replacement coverage are issued solely for hardware units tracked and verified through official SKYRS procurement and corporate supply lines.