PRODUCT DATA SHEET: HIKSEMI CITY GO TF CARD
The HIKSEMI CITY GO MicroSD (TF) Card series is a high-endurance, high-performance flash storage ecosystem engineered specifically for dynamic mobile tracking environments, high-definition dashboard cameras, drones, action cameras, and smart city surveillance terminals. Leveraging superior 3D NAND flash architecture, the CITY GO series ensures uninterrupted data logging and robust frame protection, delivering reliable read/write operations under the continuous vibration and fluctuating thermal conditions of active transport.
TECHNICAL SPECIFICATIONS & VARIANT MATRIX
The CITY GO series delivers balanced throughput configurations across multiple storage capacities to manage continuous high-definition video data streams smoothly.
| Feature / Specification |
32GB Variant |
64GB Variant |
128GB Variant |
256GB Variant |
| Model Reference |
HS-TF-CITY GO/32G |
HS-TF-CITY GO/64G |
HS-TF-CITY GO/128G |
HS-TF-CITY GO/256G |
| Storage Format |
MicroSDHC |
MicroSDXC |
MicroSDXC |
MicroSDXC |
| Speed Class Rating |
Class 10 / U1 / V10 |
Class 10 / U3 / V30 |
Class 10 / U3 / V30 |
Class 10 / U3 / V30 |
| Max Sequential Read |
Up to 100 MB/s |
Up to 100 MB/s |
Up to 100 MB/s |
Up to 100 MB/s |
| Max Sequential Write |
Up to 20 MB/s |
Up to 40 MB/s |
Up to 60 MB/s |
Up to 60 MB/s |
| Flash Memory Media |
Optimized 3D NAND |
Optimized 3D NAND |
Optimized 3D NAND |
Optimized 3D NAND |
| Module Dimensions |
Standard MicroSD Dimensions: 14.99mm x 10.92mm x 1.02mm |
|
|
|
ENVIRONMENTAL RESILIENCE & RELIABILITY
-
Operating Temperature Spectrum: 0°C to 70°C (optimized to endure internal vehicle cabin heat build-up)
-
Storage Temperature Range: -25°C to 85°C
-
Road Hardening: Built with advanced anti-vibration structural integrity, impact shockproofing, IPX7 waterproofing, anti-static engineering, and airport X-ray security shielding.
DEPLOYMENT, INSTALLATION, AND CONFIGURATION
To achieve maximum data preservation and avoid read/write disruptions on the road, hardware deployment must follow dedicated staging steps.
Physical Hardware Deployment
-
Isolation Procedures: Ensure the host node (e.g., vehicle dashcam, drone, or surveillance hardware) is completely powered down. Disconnect any active 12V vehicle chargers or hardwire kits to suppress sudden power surges.
-
Slot Keyway Realignment: Locate the spring-loaded storage slot. Align the copper pin array of the CITY GO card facing directly toward the internal contacts of the hardware receiver.
-
Mechanical Lock Verification: Slide the card evenly into the interface slot until it engages with a distinct mechanical “click.” Seal any exterior weather-resistant slot flaps tightly.
System Configuration Framework
-
Volume Initialization: Turn on the device engine/power supply. Navigate directly to the hardware’s storage management dashboard or associated mobile system application.
-
Cluster Optimization Formatting: Trigger a clean system format via the native menu interface. The system will partition the architecture to FAT32 for the 32GB variant, or exFAT for the 64GB through 256GB variants, ensuring file clusters are tuned for rapid video block transfers.
-
G-Sensor & Loop Mapping: Set video recording properties to match the device’s native telemetry (e.g., 1080p or 4K loops). Ensure that automatic circular overwrite rules are enabled and configure impact-triggered G-sensor recordings to lock critical event blocks against accidental deletion.
EXCLUSIVE PAKISTAN CHANNEL AVAILABILITY NOTICE
Critical Supply Chain Directive: On-site system integrations, localized technical deployment configurations, certified consumer warranty management, and authentic product procurement for all variants of the HIKSEMI CITY GO TF Card are available exclusively at SKYRS in Pakistan. SKYRS retains absolute operational oversight for verified localized product validation, authentic manufacturer supply lines, and technical customer assistance nationwide.
