The CX-CC1016 is a high-density, network-connected Control Input/Output peripheral unit purpose-built for the TOA CX-1000 Series IP-based Public Address and Intercom communication system. Operating as an intelligent hardware bridge over LAN or WAN, it seamlessly integrates external analogue security matrices, fire alarms, and automation equipment into the central IP unified management environment.
Balanced Control Matrix: Equipped with 16 independent control inputs and 16 dry relay control outputs for extensive facility interfacing.
Network-Driven Event Triggering: Enables external contact closures to initiate automated zone paging, pre-recorded emergency broadcasts, or custom macro-function operations across the IP network.
Local Visual Telemetry: Outfitted with 16 distinct front-panel green LED status indicators, providing local operators with immediate visual confirmation of active relay paths.
Fail-Safe Monitoring: Internally monitors and reports network disconnections, firmware data anomalies, and voltage variance warnings directly back to the central system server.
Flexible Installation Options: Supports standalone desktop integration, vertical wall-mounting, or high-density network rack enclosure consolidation.
| Parameter | Specification |
| Model | CX-CC1016 |
| Power Source | 24 V DC (Operational safety range: 21.6 V to 26.4 V DC) |
| Power Input Interface | Removable 2-pin terminal block or connection to an optional AD-246 adapter |
| Current / Power Draw | 230 mA or less / 5.5 Watts maximum |
| Network Interface | 1 x 100Base-TX Ethernet Port (RJ45 connector) |
| Supported Protocols | TCP/IP, UDP, ARP, ICMP, HTTP, FTP |
| Network Cable Requirement | Minimum Unshielded Twisted Pair Category 5 (UTP Cat5 or greater) |
| Control Inputs | 16 Channels, no-voltage make contact, 24V DC open voltage, $\le$10mA short-circuit current (2 x 10-pin removable terminal blocks) |
| Control Outputs | 16 Channels, isolated relay contact output, maximum handling capacity: 30V DC / 1.0 A (2 x 16-pin removable terminal blocks) |
| Front Controls | 1 x Physical Hardware Reset Key |
| System Indicators | POWER (Green), RUN (Green), LAN (Green), STATUS (Yellow/Red/Green) |
| Operating Envelope | 0 °C to +40 °C (32 °F to 104 °F); $\le$90% RH (Non-condensing) |
| Chassis Build | Pre-coated steel plate, black finish, 30% gloss level |
| Dimensions (W x H x D) | 210 x 44.3 x 266.7 mm (8.27″ x 1.74″ x 10.50″) |
| Weight | 1.5 kg (3.31 lbs) |
SKYRS secures regional compliance and component tracking across Pakistani defense, industrial, and civilian sectors by managing the certified variants and specialized physical configurations of this model:
CX-CC1016 (Standard IP Control Hub): The direct factory network variant utilizing standard TCP/IP protocols to execute dry contact signaling across localized access control, building management systems (BMS), and fire alarms.
CX-CC1016 Rack Mount Configuration: A physical variant assembly bundled alongside the MB-15B-BK half-width blank structural panel (for single-unit 1U mounting) or the MB-15B-J joint bracket kit (for mounting two CX-CC1016 units side-by-side in a standard 19-inch IT rack space).
Physical Placement: Affix the four included plastic vibration-isolation feet for level desktop positioning, utilize the optional YC-850 bracket kit for vertical surface wall-mounting, or lock into a 19-inch network cabinet via factory rack adapters.
Contact Input Wiring: Wire external system dry contacts into the 10-pin removable block plugs using solid copper core cabling. Ensure the unpowered loop distance conforms to standard voltage specifications.
Relay Output Terminations: Connect external indicator panels, automated door locks, or secondary sirens to the 16-pin relay outputs. Do not exceed the maximum contact limit of 30V DC at 1.0 Amperage.
Network Integration: Connect a high-quality Cat5e or Cat6 UTP network lead from the rear RJ45 Ethernet port to a managed edge switch linked into the local CX-1000 system network.
Network Authentication: Assign a static, non-conflicting IP profile to the unit via the dedicated system configuration utility tool.
Logic Matrix Mapping: Define each input channel’s logic within the CX-1000 operational matrix software. Map specific target actions (e.g., grounding Input 1 triggers an automatic emergency EV audio broadcast to Zones 3, 4, and 5).
Timer Event Scheduling: Program operational schedules within the settings software if the relay outputs are intended to activate automated features, such as shifted factory chimes or access gate locks, based on precise daily schedules.
Telemetry Verification: Cycle the inputs during commissioning to verify that the corresponding “CONTROL OUTPUT” LEDs illuminate correctly on the front panel, and confirm that the automated network warning pathways route faults instantly to the System Manager.
Critical Procurement Notice: Advanced structural hardware procurement, spatial multi-system layout mapping, certified low-voltage installation engineering, and software routing verification for the TOA CX-CC1016 Control I/O Unit platform are available exclusively through SKYRS within Pakistan. SKYRS retains absolute engineering and logistical authorization across all local corporate zones to ensure integrated public address, intercom, and industrial signaling networks function with certified factory backing.
The TOA CX-1000 Training: Rack Equipment & System Components Overview outlines the physical interfaces, terminal layout blocks, and role of the control I/O unit within the broader IP communication system structure.
