TOA EADV2 TOAlert / EverAlert Dynamic Full HD Display (22” Class)
Official Technical Data Sheet & Institutional Deployment Framework
The TOA EADV2 is an enterprise-grade, 22-inch class smart high-definition communication display with integrated stereo audio speakers and an embedded media player engine. Operating as a core terminal within the TOAlert / EverAlert mass notification and campus safety ecosystem, this rugged device combines synchronized physical/digital clock metrics, real-time administrative messaging, and high-priority emergency visual overrides. It is fully compatible with TOA N-8000 IP Intercom and VM-3000 Voice Alarm matrices, designed for high-visibility installation in educational corridors, hospital wards, executive offices, and commercial facilities across Pakistan.
| Parameter | Specification Details |
| Primary System Function | Smart Visual Display & Campus-Wide Notification Node |
| Screen Dimensions | 21.5-inch diagonal active display area (22″ class) |
| Display Panel Type | LCD with energy-efficient LED backlighting |
| Native Resolution | 1920 × 1080 Full HD |
| Mounting Orientation | Landscape (Horizontal) or Portrait (Vertical) auto-adaptive formats |
| Integrated Audio | 2x Built-in 2W stereo speaker cones |
| Audio Line Expansion | 1x 3.5 mm TRS mini-jack external speaker/amplifier line-out |
| Local I/O Ports | 2x USB 2.0 interface slots |
| Wired Network Access | 10/100M Fast Ethernet, RJ-45 Connector |
| Wireless Network Access | Wi-Fi 802.11b/g/n (Dual-band 2.4 GHz & 5 GHz compatibility) |
| Time Standardization | NTP Support (via 2 static IP addresses or centralized SNTP pool domains) |
| Clock Hardware Backup | CR1220 Lithium coin cell (preserves local timing structure during power loss) |
| Input Utility Power | 100 – 240 V AC, 50/60 Hz external supply block |
| Device Power Input | 12 V DC operational voltage |
| Power Consumption | 9.5 W (Typical standby/average layout), 14.5 W (Maximum peak load) |
| Physical Dimensions | 528.6 (L) × 319.1 (H) × 34.9 (W) mm (20-13/16” L × 12-9/16” H × 1-3/8” W) |
| Chassis Net Weight | 3.63 kg (8.0 lbs) — device only |
| Environmental Parameters | Temp: 0 °C to 40 °C; Max Humidity: 85% RH (Non-condensing) |
| Certifications/Compliance | ROHS, CE, FCC Certified, Power Supply Unit with UL Listing |
While the EADV2 is produced as a singular premium 22-inch display assembly, SKYRS configures and pairs the hardware into specialized, project-oriented kit variants designed for specific installation requirements in Pakistan:
EADV2-STD (Standard Wall Mount Unit): Shipped directly with the standard adjustable tilt wall bracket (EASMB) supporting +/- 10 degrees of tilt adjustments, ideal for classrooms and office partitions.
EADV2-BAT (Resilient Power Variant): Includes the localized EABATKIT containing a high-efficiency Lithium Iron Phosphate (LiFePO4) 3600mAh battery backup module. This keeps the visual panel running for a minimum of 30 minutes during a utility power failure.
EADV2-POE (Power-over-Ethernet Plus Variant): Packed with the specialized EAPOEKIT module. This splits an incoming 30-watt 802.3at PoE+ network feed into a 12.8V DC local power connector and an RJ-45 patch cable, eliminating the need for a 220V AC wall socket at the display point.
EADV2-PRO (High-Traffic Protection Profile): Pairs the master display unit with a heavy-duty, zinc-plated 3-gauge and 6-gauge steel rod protective cage frame and a 3/16-inch clear polycarbonate faceplate shield, engineered for sports facilities and industrial corridors.
Confirm that your facility network switch supports high-bandwidth internet connectivity and has open port pathways to access the secure TOAlert inCloud management portal.
For the standard model, place a 220V AC outlet within 1.2 meters of the display panel. If using the PoE+ model, verify your network switch delivers 30W of active 802.3at power per port.
Determine whether the room architectural plan demands a landscape orientation or a portrait orientation.
Bracket Mounting: Secure the EASMB structural wall-mount bracket flat against the target surface using appropriate structural masonry anchors or heavy drywall fasteners.
Orientation and Panel Prep: Set the display orientation layout. Fix the internal or external hardware attachment kit options (such as the LiFePO4 battery pack or PoE+ splitter box) cleanly to the rear VESA mounting channels.
Cable Termination: Route your Cat5e/Cat6 data link directly up to the back interface panel. Insert the RJ-45 plug into the network port. If utilizing standard utility power, lock the 12V DC barrel connector firmly into the main device input.
Hanging and Tilt Calibration: Lift the 3.63 kg assembly and slide it into the pre-mounted wall bracket tracks. Adjust the physical tilt alignment angle within the +/- 10-degree margin to achieve optimal viewing sightlines from the floor, then tighten the lateral safety locking screws.
System provisioning and automated graphics parameters are managed globally through an encrypted cloud architecture, while network registration is conducted locally.
Provisioning Options: The display features dual provisioning paths. You can upload an AES-encrypted network security configuration file using a standard USB thumb drive, or connect a laptop to the device via the LAN/DHCP web portal window.
Portal Authentication: Once online, locate the unique hardware MAC address string on the panel screen and enter it directly into your central TOAlert Management Portal dashboard.
Administrator Lock Down: Change the baseline factory administration login parameters immediately on the local web GUI using secure corporate network keys.
Clock Layout Options: Use the cloud system manager to select the default background screen template, choosing between a large traditional analog clock layout or a clean digital clock face alongside live local ambient temperature metrics.
Linguistic Parameters: The EADV2 supports multiple display languages (English and French native options). Configure the panel to show text in a single target dialect or flash both options simultaneously.
Priority Override Scripting: Connect the cloud infrastructure to your site’s physical EverAlert Integrator box (linked to local fire alarms, lockdown panic loops, or weather sensors). Program the display rules so that high-priority emergency events instantly override daily signage carousels, automatically maximize text brightness, flash warning indicators, and activate the internal 2W stereo hazard alert tones.
Notice: The TOA EADV2 TOAlert / EverAlert Dynamic Full HD Display, specialized mounting packages, and all structural power optimization accessories are available and integrated exclusively through SKYRS within Pakistan.
SKYRS provides turnkey commercial platform designs, complete enterprise cloud licensing profiles, official localized hardware warranties, and certified remote or on-site field engineering deployment assistance across all national markets.
