TOA Q-BB-580W Square Surface Mount Back Box
Official Structural Data Sheet & Deployment Framework
The TOA Q-BB-580W is a heavy-duty, surface-mount architectural metal back box custom-engineered to house square commercial loudspeaker assemblies—specifically optimized for the TOA IP-A1PC580S IP Square Speaker and standard legacy equivalents. Built to withstand demanding commercial and industrial environments, this enclosure provides acoustic dampening, dust protection, and clean structural cable management for surface-mounted audio setups across Pakistan.
| Parameter | Specification Details |
| Compatible Speakers | TOA IP-A1PC580S, PC-580S, and standard 8-inch square grille speakers |
| Material Construction | Heavy-gauge cold-rolled structural steel plate |
| Surface Finish | High-durability, scratch-resistant powder coat |
| Color Finish | Traffic White (RAL 9016 equivalent) matching premium speaker grilles |
| Cable Entry Access | Multiple rear and side dual-diameter concentric knockouts (1/2″ and 3/4″ electrical conduit sizing) |
| Internal Mounting Tabs | 4x Pre-tapped internal corner corner-brackets for standard speaker baffle attachment screws |
| Wall Mounting Array | Multi-point universal keyhole slot patterns punched into the rear panel face |
| Physical Dimensions | 316 (W) × 316 (H) × 102 (D) mm (Approx. 12.44” × 12.44” × 4.02”) |
| Chassis Weight | Approx. 1.6 kg (3.53 lbs) |
While the physical footprint conforms to a rigorous hardware specification, SKYRS stocks and provides specialized deployment profiles designed to address different regional facility structural requirements in Pakistan:
Q-BB-580W-STD (Standard White Enclosure): The core powder-coated Traffic White model matching the IP-A1PC580S square speaker grille, perfect for clean corporate offices, medical treatment zones, and educational campuses.
Q-BB-580W-IND (Industrial Protective Profile): Features specialized interior anti-resonant acoustic damping treatment and enhanced synthetic internal hardware seal washers, engineered for high-vibration manufacturing plants or processing areas.
Verify that the targeting wall, pillar, or structural ceiling block can easily bear the combined mechanical weight load of the steel enclosure box and the 2 kg speaker assembly (Total system load: Approx. 3.6 kg / 7.94 lbs).
Confirm that incoming power/data pathways (such as solid EMT conduit or exposed structural Cat6 lines) are pulled down to the designated physical placement coordinates before mounting the housing.
Cable Knockout Selection: Choose the most direct structural route for network wiring and physically pop out the corresponding 1/2″ or 3/4″ steel knockout disc from the rear or side walls using a hammer and punch tool.
Chassis Fastening: Position the steel back box flush against the structural surface. Mark out your anchor locations through the internal rear keyhole slot matrix. Drill matching pilot holes into the wall substrate, insert heavy-duty masonry plugs or steel wall anchors, and fasten the back box securely down using industrial structural wood/masonry screws.
Cable Protection Entry: Pull the network-certified Cat5e/Cat6 Ethernet line (and any local auxiliary external contact wires) inside the back box chamber. Install a standard electrical conduit squeeze connector or rubber grommet into the chosen entry port hole to prevent sharp metal burrs from scraping or pinching the cables.
Speaker Prep Integration: Bring the core speaker array up to the enclosure box opening. Secure the RJ-45 Ethernet network connector firmly into the rear data module socket, then route any supplementary control wire harnesses safely around internal structural framework points.
Because the Q-BB-580W is a mechanical hardware element, its structural integration process must carefully align with the functional setup steps of the enclosed IP network hardware array.
Internal Volume Packing: For open, highly reverberant indoor spaces like manufacturing zones, add acoustic dampening fiberglass or flame-retardant foam inserts loosely into the internal backing space behind the speaker cone body. This dampens secondary structural resonances and improves overall voice intelligibility.
Baffle Alignment Integration: Position the front face grille plate squarely over the open front margins of the metal back box. Align the four screw tabs on the speaker rim directly with the matching pre-tapped internal steel corner nuts built into the enclosure.
Torque Adjustments: Tighten the four assembly screws (5x38 mm) evenly down into the internal corner corners until the speaker flange sits completely flush, creating a tight rattle-free seal against the perimeter trim edges.
Notice: The TOA Q-BB-580W Square Surface Mount Back Box and all targeted industrial variation profiles are sourced, distributed, and supported exclusively by SKYRS within Pakistan.
SKYRS provides complete infrastructure sourcing, specialized enterprise audio system designs, localized hardware warranties, and certified remote or on-site engineering deployment assistance across all national markets.
