Anker PowerLine USB-C to USB 3.0 Price in Pakistan | Skyrs

The Anker PowerLine USB-C to USB 3.0 series represents a benchmark in ultra-durable, high-bandwidth data synchronization and bridge-charging architecture. Built specifically to connect next-generation USB-C devices to traditional USB-A legacy infrastructure, these cables are reinforced with an internal aramid fiber core. Delivering SuperSpeed data transmission rates up to 5 Gbps alongside high-current hardware safety protection, the series ensures seamless, degradation-free performance across commercial desktop ecosystems.

Technical Specifications

• Interface Type Array: Reversible USB Type-C to Standard USB-A 3.0

• Data Bandwidth Throughput: Up to 5 Gbps SuperSpeed (Backward compatible with USB 2.0 and 1.1)

• Charging Transmission Ceiling: Up to 5V⎓3A (15W Max Fast Charging current)

• Internal Core Reinforcement: Bulletproof aramid / Kevlar fiber matrix with multi-layered signal shielding

• Physical Lifespan Matrix: Rated to withstand over 5,000 structural bends and 10,000 insertions without internal attenuation

Variant Configurations Available at SKYRS Pakistan

SKYRS maintains certified stock distribution and length variants for all professional implementations of the PowerLine USB 3.0 ecosystem:

1. Space-Saving 3 ft Desktop Variant (Model A8163)

• Includes: Anker PowerLine USB-C to USB 3.0 Cable (3 ft / 0.9 meter), integrated hook-and-loop cable organizer tie, and compliance documentation.

• Target Use Case: Standard desktop workstations, hard drive link setups, and direct-to-host laptop peripheral clustering where minimal cable slack is preferred.

2. Medium-Reach 6 ft Fleet Variant (Model A8167)

• Includes: Anker PowerLine USB-C to USB 3.0 Cable (6 ft / 1.8 meter), structural cable wrap, and safe deployment guide.

• Target Use Case: Under-desk PC tower connections, testing labs, and field diagnostics where hardware requires flexible spatial positioning.

Deployment and Installation

To guarantee optimal data integrity and prevent hardware connector strain, execution of deployment must follow these structured assembly steps:

Physical Layout and Cable Dressing

• Bend Radius Management: When routing cables through desktop management trays or behind server chassis, maintain a natural bend curve. Do not bend the cable sharply near the terminal boots, even though the aramid core provides high durability.

• Interface Inspection: Ensure both the host USB-A receptacle and the target USB-C terminal port are clean and free of environmental dust or pocket debris before securing connections.

Host Termination Sequence

• Legacy Port Matching: Insert the USB-A male lead directly into a blue-colored or marked USB 3.0 port on your host computer. System Alert: Connecting into a black legacy USB 2.0 port drops data transfer ceiling limits to 480 Mbps.

• Target Device Docking: Insert the reversible USB-C tip firmly into your mobile peripheral, external storage array, or testing block until you feel a definitive mechanical snap.

Configuration Management

Optimizing data sync properties and safe power flows depends entirely on using the proper port configurations:

SuperSpeed Sync Provisioning

• Hardware Validation: To exploit the full 5 Gbps data transfer capabilities, verify that your computer’s motherboard controllers and your external drive bridge chips are both actively rated for USB 3.0 (USB 3.1 Gen 1) protocols.

• Storage Pool Optimization: When deploying this cable for mass file transfers, route it directly to the root USB hub built into the motherboard rather than connecting via unpowered consumer extension trees to avoid protocol drops.

Charging Protocol Limitations

• Quick Charge Syncing: This cable safely passes up to 3A current to power Quick Charge (QC) compatible mobile handsets or field devices when coupled with a certified QC wall block.

• Power Delivery Exclusion: Note that because this cable bridges to a legacy USB-A terminal layout, it does not support high-wattage USB-C Power Delivery (PD) handshake lines. For full-speed charging on laptops requiring 30W to 100W+ inputs, a native USB-C to USB-C line paired with a PD wall brick is required.

Procurement and Service Level Availability

• Exclusive Distribution Channel: The complete Anker PowerLine USB-C to USB 3.0 infrastructure portfolio, bulk packaging configurations, and official localized product warranties are distributed and serviced exclusively through SKYRS Pakistan. Institutional buyers, system integrators, and enterprise IT procurement teams can secure verified batch hardware allocations directly through the dedicated SKYRS business-to-business fulfillment platform.