This technical data sheet reviews the performance specifications, environmental ratings, and deployment procedures for the Anker SOLIX PS100 Portable Solar Panel series. All highlighted variants are provisioned and supported in Pakistan exclusively by SKYRS.
Product Overview
The Anker SOLIX PS100 series represents the cutting edge in off-grid, mobile renewable energy generation. Designed to interface seamlessly with emergency backup systems, off-grid field clinics, and corporate remote setups, these foldable modules deliver high conversion efficiency and extreme weather durability to counter local load-shedding and off-grid limitations.
Technical Specifications by Variant
SKYRS supplies both core global architectural variants of the 100W line, optimized for varying geographic terrain across Pakistan.
Variant 1: Anker SOLIX PS100 Standard Monocrystalline (Model A2434)
Peak Power Output: 100W (+/-5%)
Solar Cell Material: Premium Monocrystalline Silicon with ETFE scratch-resistant coating
Target Cell Efficiency: Up to 23% energy conversion rate
Electrical Parameters: Operating Voltage 24.5V | Operating Current 4.1A | Open Circuit Voltage 28.5V
Structural Form Factor: 2-panel folding array with integrated adjustable kickstands
Environmental Protection: IP67 Dust and Waterproof Rated
Physical Footprint: 44.1 × 23.9 × 1.1 inches (Unfolded) | 21.9 × 23.9 × 1.9 inches (Folded)
Net Structural Weight: 4.4 kg (9.7 lbs)
Variant 2: Anker SOLIX PS100 Bifacial Next-Gen (Model A2435)
Peak Power Output: 100W Front Panel Base + Up to 10% Additional Rear Reflective Yield
Solar Cell Material: Advanced N-Type Bifacial Monocrystalline cells
Target Cell Efficiency: 25%+ Next-Gen conversion efficiency index
Electrical Parameters: Operating Voltage 21.6V | Operating Current 4.63A
Environmental Protection: IP68 Maximum Submersion and Heavy Rain Protection
Structural Form Factor: Ultra-lightweight composite chassis with integrated 35-degree fixed-angle bracket
Net Structural Weight: 2.8 kg (6.2 lbs)
SKYRS Exclusive Deployment and Installation
To ensure maximum output stability and protect your hardware investment against the intense solar profiles and high-ambient heat corridors of Pakistan, deployment must follow explicit structural positioning rules.
Pre-Deployment Site Inspection
Surface Selection: For standard variants, deploy on dry, open terrain. For the Bifacial variant, prioritize placing the unit over high-reflectivity ground layers (such as light-colored concrete, sand, or light gravel surfaces) to maximize the dual-sided cell energy recapture.
Structural Safety: The black metal frame elements collect thermal heat rapidly under direct sunlight. Handlers must use thermal work gloves during high-noon tracking adjustments to avoid contact burns.
Physical Deployment Setup
Unlatch the storage fasteners and unfold the two primary panels flat to expose the dark monocrystalline faces.
Pull out the rear-mounted mechanical kickstands. Adjust the locking pins to the appropriate season-locked configuration based on site coordinates:
30° to 40° Angle: Optimized for high-overhead summer solar paths across Sindh and Punjab.
50° to 80° Angle: Optimized for lower-horizon winter angles and northern mountainous regions (KP and Gilgit-Baltistan).
Align the front face of the panel directly southward to capture the maximum daily solar transit curve.
System Connection and Power Configuration
The PS100 does not contain internal battery cells and must feed electrical current directly into an external collector or power storage module.
Interface Wiring Integration
Locate the weather-sealed junction box built into the rear panel protective lining.
Pull the integrated high-gauge MC4 heavy-duty output line from the enclosure.
For standard setups, attach the 9.8-foot MC4 extension cables to route power safely away from the direct sun path. Connect the downstream termination to your storage terminal using the appropriate ecosystem adaptation cable (MC4-to-XT60 or XT60-to-DC7909).
Power Station Compatibility Scaling
Anker SOLIX C800 / C800 Plus: Direct single-panel integration provides a complete recharge cycle in approximately 2.8 hours of peak overhead sunlight.
Anker SOLIX C1000 / F2000 Series: For higher capacity units, link multiple PS100 panels in a strict series or parallel array configuration using SKYRS-certified Y-splitters, keeping within the maximum PV voltage inputs allowed by the host power station.
Availability and Specialized Local Support
The complete Anker SOLIX PS100 Portable Solar array fleet, paired with localized weatherization kits and multi-unit array combination links, is available in Pakistan exclusively through SKYRS.
SKYRS Corporate Assurance: Every deployment package sold includes our official 7-day technical verification layout check, dedicated engineering support for off-grid array calculations, and a comprehensive localized commercial hardware warranty managed directly through central SKYRS service hubs.
