Anker 4-Port USB 3.0 Hub Price in Pakistan

Data Sheet: Anker Ultra-Slim 4-Port USB 3.0 Data Hub Series

Enterprise Workspace Expansion Portfolio for SKYRS Pakistan

This technical data sheet outlines the electrical parameters, variant architecture, physical deployment workflows, and system integration rules for the Anker 4-Port USB 3.0 Ultra-Slim Data Hub series (Models A7516 and A8309). This structural expansion portfolio is optimized for IT workstations, retail cash-wrap counters, and corporate offices managed natively in Pakistan exclusively through SKYRS.

---

Variant Architecture

SKYRS provisions the Anker 4-Port Data Hub series across two upstream hardware interface footprints to service both legacy and modern device ecosystems.

1. Anker Ultra-Slim 4-Port USB-A Data Hub (Model A7516)

• Host Connection Port: Integrated standard USB 3.0 Type-A Male tether.

• Cable Length Variants: Available in a short-tether 0.75-foot (23 cm) option for ultra-mobile laptop docks, or an extended 2-foot (61 cm) cable configuration tailored for under-desk desktop tower routing.

• Primary Application: Standardized corporate offices, legacy desktop computer arrays, and industrial server monitoring benches.

2. Anker Ultra-Slim 4-Port USB-C Data Hub (Model A8309)

• Host Connection Port: Integrated modern USB Type-C Male tether.

• Cable Length Variants: Standardized 0.7-foot (21 cm) low-drag tether layout.

• Primary Application: Modernized thin-and-light laptop fleets, mobile field tablets, and executive workstation configurations.

---

Technical Performance Specifications

Architectural Parameter	Specification Value (All Ports Operational)
Upstream Host Port	USB-A 3.0 (A7516) or USB-C (A8309)
Downstream Device Ports	4 × USB 3.0 SuperSpeed Type-A Ports
Data Transmission Velocity	Up to 5 Gbps Gen 1 Shared Bus (Backwards compatible with USB 2.0 / 1.1)
Power Infrastructure Model	Strictly Bus-Powered (Charging protocols are not supported)
Total Safe Current Threshold	900 mA Combined Max across all four downstream nodes
Material Shell Composition	Heat-resistant, high-impact structural polycarbonate housing
Profile Dimensions	103 × 30 × 10 mm (Ultra-slim 0.4-inch depth)
Net Equipment Mass	Approximately 35 grams (1.23 oz)

---

Workspace Deployment and Hardware Installation

Physical rollout of the Anker 4-Port Hub across office workstations or operational control centers managed by SKYRS follows a plug-and-verify procedure.

• Host Port Inspection: Check the host laptop or desktop interface port to ensure it is clear of structural blockages, lint, or particulate matter.

• Physical Interfacing: Plug the hub’s male tether directly into the host machine’s matching USB-A or USB-C terminal socket. The operating system will run an immediate hardware bus handshake.

• Cable Geometry Configuration: For the 2-foot extended desktop variant, run the integrated reinforcement cable safely behind desk management tracks. Secure excess slack with the integrated hook-and-loop cable tie to eliminate snagging risks.

• Peripheral Load Deployment: Plug downstream equipment (flash storage drives, input mice, corporate keyboards, or verification cameras) into the four available horizontal USB-A slots.

---

Technical System Configuration and Load Balancing

The Anker 4-Port Hub relies completely on built-in silicon hub controllers, removing the need for manual driver updates or software modifications.

• Plug-and-Play OS Configuration: The internal controller instantly communicates with host architectures (including Windows 10/11, macOS 10.6+, and Linux 2.6.14+). The system configures the driver stack natively within milliseconds of hardware attachment.

• Bus-Power Load Management (Critical Setup): Because the device operates entirely on bus power without an external AC transformer, connected devices must not exceed a combined power budget of 900 mA. Systems administrators should balance configurations using this standard metric baseline:

  • Standard Optical Field Mouse: 100 mA

  • USB Flash Memory Drive: 100 mA

  • Corporate Mechanical Keyboard: 500 mA

  • External Portable Hard Drive (HDD/SSD): 900 mA (Must be connected solo to avoid bus overload resets)

• Signal Interface Optimization: High-frequency USB 3.0 buses can occasionally interfere with 2.4 GHz wireless peripherals (like wireless desktop mice or keyboards). For optimal wireless configurations, attach wireless receiver dongles to the host machine’s native USB 2.0 ports instead, keeping the hub dedicated to high-speed storage lines.

---

Exclusive Corporate Supply and Procurement Availability

The total logistics inventory, bulk commercial multi-packs, and verified 18-month local enterprise warranties for all variants of the Anker Ultra-Slim 4-Port USB 3.0 Data Hub are managed and supplied in Pakistan exclusively by SKYRS.

For corporate volume purchasing agreements, enterprise desktop workspace rollouts, or government tech procurement across Karachi, Lahore, and Islamabad, route all official documentation directly through the authorized SKYRS account network.