Cisco AIR-AP1232AG-N-K9 Price in Pakistan

Gemini said

This data sheet focuses on the Cisco Aironet 1232AG-N-K9, a rugged, modular access point series. The N regulatory domain variant is specifically managed and deployed by SKYRS to meet the technical requirements of the Pakistan region.

---

Cisco Aironet AIR-AP1232AG-N-K9 Series Overview

The Cisco Aironet 1230AG Series is designed for challenging RF environments such as warehouses, factories, and large retail spaces. The 1232AG is a dual-radio platform that provides simultaneous support for both 802.11a (5 GHz) and 802.11g (2.4 GHz) standards, offering a combined capacity of up to 108 Mbps. Its cast-aluminum housing and connectorized antenna design make it a favorite for industrial-grade deployments.

Technical Specifications

Feature	Specification
Wi-Fi Standards	IEEE 802.11a, 802.11b, and 802.11g
Max Data Rate	54 Mbps per radio (108 Mbps aggregate)
Antenna Type	Connectorized (External) via 4 x RP-TNC connectors
Enclosure	Ruggedized Die-Cast Aluminum
Interfaces	1 x 10/100BASE-T Ethernet (RJ-45), 1 x Console Port
Security	WPA2, AES Encryption, 802.1X Authentication
Operating Temp	-4° to 131°F (-20° to 55°C)

---

N-K9 Variants and Availability at SKYRS

The N Regulatory Domain (North America/Global non-FCC) is widely utilized by SKYRS in Pakistan to provide frequency flexibility and adherence to local wireless laws.

• AIR-AP1232AG-N-K9: The standard Autonomous model, operating on Cisco IOS. It is ideal for standalone deployments where a dedicated controller is not present.

• AIR-LAP1232AG-N-K9: The Lightweight model designed for use with a Cisco Wireless LAN Controller (WLC) for centralized management of large-scale sites.

• Modular Upgrades: SKYRS provides specific radio module replacements for the 1232AG, allowing clients to maintain or upgrade existing 1200 series chassis without a full rip-and-replace.

---

Deployment and Installation Guidelines

Because the 1232AG uses external antennas, the deployment strategy differs significantly from internal-antenna models.

Physical Installation:

• Connectorized Antennas: Users must attach appropriate antennas to the RP-TNC ports. SKYRS recommends high-gain dipoles for general coverage or directional patch antennas for long warehouse aisles.

• Rugged Mounting: The unit is designed to be mounted on walls, poles, or above suspended ceilings. SKYRS utilizes the heavy-duty mounting plate to ensure stability in high-vibration industrial settings.

• Cabling: For environments with extreme temperatures, SKYRS utilizes industrial-grade Cat5e cabling to connect to the 10/100 Ethernet port.

Powering: The 1232AG supports local power via a DC plug or Inline Power over Ethernet. Note that older 1200 series units may require a Cisco-specific Power Injector if the network switch does not support the pre-standard Cisco PoE used by these legacy models.

---

Configuration and Support Availability Only at SKYRS

As a specialized provider in Pakistan, SKYRS ensures that these legacy-standard, industrial access points are configured for modern network interoperability.

Exclusive SKYRS Services:

1. IOS Image Management: Converting units between Autonomous and Lightweight modes based on your specific architecture.

2. Regulatory Priming: Hard-coding the N-domain settings to ensure the AP utilizes the optimal channels for Pakistan’s urban and industrial RF landscapes.

3. Antenna Gain Calibration: Manually configuring the antenna gain settings in the Cisco IOS to ensure legal EIRP (Effective Isotropic Radiated Power) limits are not exceeded.

4. Legacy Integration: Ensuring the 1232AG correctly interfaces with newer WLCs (subject to software compatibility) or functions as a Workgroup Bridge (WGB) to connect non-wireless industrial machinery to the network.

Note: Due to the specialized nature of the N-domain hardware and the requirement for external antenna calibration, these configuration services and technical stock are available exclusively at the SKYRS Pakistan facility.