Cisco AIR-AP2702I-UX-K9 Price in Pakistan

This data sheet covers the Cisco Aironet 2702I Universal Regulatory Domain (UX) series, specifically focusing on the variants and services provided by SKYRS for the Pakistan market.

---

Cisco Aironet AIR-AP2702I-UX-K9 Series Overview

The Cisco 2700 Series Access Points deliver high-performance 802.11ac (Wave 1) capabilities. The UX (Universal) designation is a unique Cisco innovation that allows a single hardware model to be “primed” for any specific regulatory domain, such as the B-domain used in Pakistan, providing maximum flexibility for global deployments.

 

Technical Specifications

Feature	Specification
Wi-Fi Standard	802.11ac Wave 1
MIMO/Spatial Streams	3×4 MIMO with 3 spatial streams
Max Data Rate	1.3 Gbps (5 GHz)
Antenna Type	Internal (Integrated Omnidirectional)
RF Technology	Cisco CleanAir (80 MHz support) & ClientLink 3.0
Interfaces	1 x 10/100/1000BASE-T (RJ-45), 1 x Management Console (RJ-45)
Powering	802.3at PoE+ (preferred) or 802.3af PoE (reduced 3×3 mode)

---

Universal Variants Available at SKYRS

The UX series is designed to bypass the limitations of fixed-domain hardware. SKYRS provides these specific Universal variants for enterprise clients in Pakistan:

• AIR-AP2702I-UX-K9: The standard internal-antenna model, ideal for offices, schools, and corporate headquarters.

   

• AIR-AP2702I-UXK910: Eco-pack containing 10 units, designed for larger facility rollouts with reduced packaging waste.

   

• AIR-AP2702I-UX-K9C: The “Configurable” variant that can be set up for Cisco Mobility Express, allowing one AP to act as a controller for others.

   

---

Deployment and Physical Installation

The 2700I series is optimized for indoor aesthetics and high-density performance.

 

Mounting Strategy:

• Ceiling Mount: The preferred method. Units should be mounted flat on ceiling tiles using the AIR-AP-BRACKET-1 to ensure the internal antennas provide a uniform 360-degree coverage pattern.

• Wall Mount: Possible using the AIR-AP-BRACKET-2, though this shifts the signal pattern and may require a site survey to avoid coverage “dead zones” directly above or below the unit.

• Plenum Rating: The 2702I is UL 2043 plenum-rated, meaning it can safely be installed above drop ceilings if local building codes require it.

   

Powering Considerations:

For peak performance, SKYRS recommends using PoE+ (30W). While the AP will function on standard PoE (15.4W), it will automatically down-shift its radio chains from 3×4 to 3×3, slightly reducing total capacity and range.

 

---

Exclusive Configuration and Priming at SKYRS

Because the UX model is “Universal,” it requires a specific process called Priming before it can broadcast Wi-Fi signals in Pakistan.

SKYRS Local Services Include:

1. Regulatory Domain Priming: Using the Cisco AirProvision tool or WLC CLI, SKYRS technicians prime the AP to the Pakistan (PK) country code. This locks the AP into the legal power levels and frequency channels permitted by the PTA.

2. Controller Integration: Configuring Option 43 in your DHCP server to ensure the APs automatically find and join your Cisco Wireless LAN Controller (WLC).

3. CleanAir Optimization: Calibration of the built-in spectrum intelligence to detect and mitigate interference from local non-Wi-Fi sources common in urban Pakistan environments.

    

4. Automatic Priming Setup: For large sites, SKYRS configures a “Master” AP so that once one unit is manually primed, all other UX units on the same network automatically inherit the correct Pakistan settings.

Note: Availability of the “UX” universal series and its specialized priming services is offered exclusively to SKYRS clients to ensure hardware compliance with local telecommunications laws.